Picturesque Goa

Picturesque Goa
NOSTALGIA - Articles,Poems & Photos

TONFERNS CREATIONS

TONFERNS CREATIONS
TONFERNS CREATIONS - Tony's Art & Hobbies

Wednesday, March 18, 2009

DAYS OF THE BULLOCK CART IN GOA


BULLOCK CART
Parra, Goa - India
(Photo: Tony Fernandes, 2005)

The ‘gaddo’ is a 2-wheeled carriage drawn by trained bullocks commonly used in Goa till today. It is constructed fully from wood. Its fastest travelling speed could be compared to the usual leisurely walk of a steer.

My earliest memorable experience in travelling on this sort of conveyance was when I was young, hitching a ride on my way home from school. This type of carts were privately-owned and almost every village had one or two.

The two large iron-rimmed square wooden-spoked wheels serve a dual purpose - as fly-wheels and riding wheels combined, giving the cart the needed momentum. It seems it is effortless for the bulls to haul these carts once they get rolling. These carts are used to transport a gamut of goods from firewood, furniture and laterite stones to roof tiles, sacks of paddy, coconuts and lumber. Quite often we can see a few school kids getting a free ride home just for the fun of it in the villages.

Among my earliest memories in witnessing something valuable delivered to our house by this versatile cart was in the early nineteen sixties. The furniture it carried was a wooden cupboard or almirah (almar in colloquial Konkani) with a full length mirror, chairs and a folding dining table that my father had purchased from the huge annual fair held at the feast of Nossa Senhora de Milagres in Mapusa.

This sort of a cart was also used by the ‘gaddekar’ from Nagoa, Bardez, who plied through the villages at dawn selling salt just before the onset of the monsoon season, with his high-pitched and very distinguished call: ‘Hey Mitt’. One of the most audible continuous sound that emanated from it was the crunchy and grinding noise produced by the turning of its wheels, and its most outstanding visible feature was the huge pair of wheels. And of course, I can still recall its unforgettable and discernible trademark – its peculiar musty odour.

These flat-bed carts provided a cheaper means of transportation of goods and other provisions such as the ones mentioned above. They did not have any springs for suspension - hence the ride was bumpy. The fixed rigid axle consisted of approx. 6 in x 6in wooden beam with a track width of about 6 feet, and was fitted to the underside of the flat-bed made up of butt-jointed wood slats and side beam fitted with side-rails. A canvas or hessian bag slung over the outside of these siding would hold the drivers personal belongings, and of course his lunch tiffin. Often a bucket and a net containing hay was tied to the longitudinal beam. The wheels were of about 6 ft. dia. with large hubs (around 12" dia.) and iron rims (about 2-1/2" wide). The fully timber-crafted wheels were locked or stopped on the outer edge by means of drop-pins into well-greased axle ends. The outer iron rims were 'shrink-fitted'* to the wooden wheel that comprised of the assembly with 12 wooden spokes, hub and the wheel segments that made up the entire wheel itself.

During the rainy season an arch-shaped high covering would be fitted over the cart in order to provide protection for the safe transportation of merchandise or goods.

The front end consisted of a double bow yoke that was placed on top of the longitudinal single centre-piece that ran along the full length of the cart itself, forming a cross at the head. The yoke was fastened to the longitudinal beam by means of a rope thereby giving it the flexibility of pivoting it to some degree, and giving it a marginal swivel action between the pair of bullocks. This feature aided tight turns. The yoke was harnessed over their necks in order to pull the carriage. The centre-piece curved and extended downward at the front so that, without the bulls, the cart would rest at a least possible slant.

Braking on these carts was unique, provided by a cleverly designed device. It consisted of two wooden poles, fitted parallel across the front and back of the wheels. They were connected into an intricate double acting trapezoidal contrivance of ropes. This device was in turn connected by a longer rope from the rear to the front. The master of the cart perched himself sideways on the longitudinal beam whenever the cart carried a full load, whereas when empty he made himself comfortable on the front edge of the flat-bed. The driver himself acted like a mechanical master cylinder - and by means of applying pressure on this rope with his leg or some his whole body weight he would be able to slow down the cart, while going downward on a slope or bring it to a stop in an emergency. This was achieved by the action of the parallel wooden poles pressing against the outer iron rims of the wheels. These wooden poles that acted as 'brakes' were slightly flattened at the point where they came in contact with the outer iron rims of the wheels. In overall action the whole system resembled the opposite of caliper drum brakes of the present day.

Additional stopping or braking power was provided verbally, or with gentle 'ho-ho'. The rest of the maneuvering and negotiating was done by means of touch or contact conveyed to the bullocks by the driver with a stick - a slight nudge here and a slight tap there - on their backs. If parked on a slope the wheels were chocked with a stone. At most times the bullocks seemed ever obedient, gentle in nature and never seemed to be in a hurry, but there were the odd instances when they got unruly and didn't pay heed to any commands. These animals were held in reverence by the owner and his family members, and respected for the work and sustenance they provided.

The yoke rested over the necks of the bullocks, and in hauling it stopped short just before the ridge of their shoulder blades. In some cases bells hung around the bulls’ necks rang constantly as they passed by on the road. These bells had a distinct sound and acted as warning bells to others, or merely let the people know about the presence of the ‘gaddo’ passing through the area. They sound of the bells 'kinni-kinni' could be heard far away and long into the quietness of the night as the lone hard-working driver returned home. A gently swinging hurricane lamp hung low in front, beneath the main beam and between the bulls. The light from this lamp was more to warn others of its approach to oncoming motor vehicles rather than a light to guide itself or light up the road.

They are less common nowadays and are gradually being pulled out of service as their popularity goes on the decline due the increasing number of motor transport vehicles, commonly known as ‘tempos’. They were mainly confined to their own districts and seldom made long trips over the hills.

Another impression stuck in my mind is that people walking briskly along the road often overtook them. Among my childhood memories are the ones that the bulls usually seemed to make a good team: faithful, quiet, with their downward and humble gaze, always seemingly engrossed in their own thoughts, and also the very rare sight of the driver asleep, with the bridle reins and stick in his hands. But there were one or two instances that I recall of the runaway cart, when the disgruntled bulls ran uncontrolably fast to the utter dismay of the driver, but to mischievous glee of the youngsters.

There was certainly an advantage in having trained bullocks so that way the driver could be assured of reaching home safely by taking the shortest route possible after a long and hard day’s work. Having trained bullocks meant like putting them on auto-pilot and be on the right track. And without a GPS system he could still reach home while he took a short nap.

The era of these types of slow but fairly reliable vehicles is slowly making an exit, replaced by the 'tempos' or trucks or rickshaws with a trailer.

Those were the days of innovative ways of another period of yore. It is now just a childhood memory - gone but not forgotten.

Tony Fernandes

*Shrink-fitting is a process that our science teacher taught us in school about 'expansion' and 'contraction", whereby the pre-formed iron wheel was heated by the blacksmith to expand it. The iron rims were rather made smaller than the wooden wheel in the first instance, and then they it would be placed on the ready wooden wheels and immediately cooled by dousing it with water. The quick cooling brought about by contact with water would contract or shrink the iron rim tightly over the wooden wheel and at the same time also prevented the likelihood of it catching fire.


2 comments:

Anonymous said...

wow! quite a detailed description. Your memory is amazing. The shrink fitting process was interesting. I, too, remember that from high school.

Anonymous said...

It's going to be end of mine day, except before ending I am reading this fantastic piece of writing to increase my experience.

my web site - acoustic guitar chord